|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Britain Cruiser Mk I (A9) Ordnance classification - A9
|
| The Cruiser Mk I was designed in 1936, manufactured by Vickers Armstrong and was in use from 1937 to 1941. |
|
| Specifications | Operational Date(s) | 1937 - 1941 | Ordnance classification | A9 | Quantity Produced | 125 | Weight | 12 tonne | Crew | 6 | M.G's small | 3 | M.G's large(>10mm) | n/a | Length | 5.92 mtr | Width | 2.56 mtr | Height | 2.56 mtr | Engine Details/Performance | Max Road Speed | 25 mph | Max Cross Country Speed | 13 mph | Range Road | 150 miles | Range Cross Country | 60 miles | Fuel Type | Petrol | Fuel Capacity | 86 gal | Horse Power | 150 hp | Power/Weight | 12 hp/tonne | | General Information | The Cruiser Mk I was designed in 1936, manufactured by Vickers Armstrong and was in use from 1937 to 1941.
The vehicle was powered by Associated Equipment Company(AEC) 'AEC 179 6-cylinder' petrol powerplant producing 150 HP which could drive the vehicle on roads at up to 25 mph with a range of about 150 miles before refuelling. Its cross country performance was good providing a max speed of about 13 mph and a range of about 60 miles.
It was armed with 3 light machine guns which were Vickers Medium Machine Guns. Its main armament consisted of an Ordnance Q.F. 2pdr which could penetrate 67 mm of flat plate at 200 metres
The turret had power traverse with a 2pdr A/T gun and a Vickers machine gun. The vehicle also had two auxillliary machine gun turrets housing Vickers machine guns. | |
| Turret | Front | | 14mm | @ | 20° | (15mm) | Side | | 12mm | @ | 20° | (13mm) | Rear | | 14mm | @ | 20° | (15mm) | Top | | 4mm | @ | 90° | (4mm) | | Superstructure | Front | | 14mm | @ | 45° | (20mm) | Side | | 10mm | @ | 0° | (10mm) | Rear | | 10mm | @ | 0° | (10mm) | Top | | 5mm | @ | 90° | (5mm) | |
Hull | Front | | 14mm | @ | 30° | (16mm) | Side | | 10mm | @ | 0° | (10mm) | Rear | | 10mm | @ | 0° | (10mm) | Top | | 5mm | @ | 90° | (5mm) | | Armour (x)mm @ (y)° (Effective mm @ 0°) | Effective Armour - Maximum 20 mm - Minimum 5 mm |
| |
Weapon Details |
|
Vickers Medium Machine Gun (Machine Gun) x 3 |
|
|
| | History | |
| | The Vickers medium machine gun was designed during World War I as a replacement for the Maxim gun from which its design was taken.
It served throughout World War I and II as a fixed point machine gun used to suppress areas and act as a defensive point. |
| | Manufacturer | Vickers |
| | Manufactured | 1912 - 1968 |
| | Calibre | 7.70mm |
| | Length | L/93 |
| | Rate of Fire | 450 rpm |
| | Number of Rounds | 3000 |
|
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
Standard british .303 round - MkVIII (only used in Vickers Mg)
(BALL Standard Small Arms)
|
7.70mm 0.01Kg 844M/Sec | |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.14 |
|
|
|
|
|
|
|
Penetration(mm@30°) |
2 |
|
|
|
|
|
|
|
Penetration(mm@0°) |
3 |
|
|
|
|
|
|
|
Hit Probability(%) |
98 |
|
|
|
|
|
|
|
Weapon Details |
|
Ordnance Q.F. 2pdr (Anti Tank Gun) |
|
|
| | History | |
| | Used both as an Anti Tank gun and as a Tank gun the 2pdr was first used in Belgium in 1939. The majority of the British guns were captured by the Germans at Dunkirk. However the 2pdr manufacture was continued but was slowly replaced by the 6pdr from 1942. |
| | Manufactured | 1936 - 1944 |
| | Calibre | 40mm |
| | Length | L/50 |
| | Rate of Fire | 22 rpm |
| | Number of Rounds | 100 |
|
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
AP/T Mk I
(AP Armor Piercing)
|
40mm 1.08Kg 792M/Sec | |
Quoted Penetration 53mm@455m |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.13 |
0.27 |
0.56 |
1.26 |
2.17 |
3.37 |
5.06 |
7.58 |
Penetration(mm@30°) |
64 |
58 |
51 |
41 |
33 |
25 |
19 |
13 |
Penetration(mm@0°) |
74 |
67 |
59 |
48 |
39 |
30 |
22 |
16 |
Hit Probability(%) |
98 |
98 |
98 |
93 |
60 |
25 |
6 |
2 |
HE/T Mk II after 1942
(HE High Explosive)
|
40mm 0.86Kg 792M/Sec | 0.085Kg explosive |
Maximum Range not shown as gun elevation is limited |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.13 |
0.27 |
0.56 |
1.26 |
2.17 |
3.37 |
5.06 |
7.59 |
Direct Fire |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.13 |
0.27 |
0.56 |
1.26 |
2.17 |
3.37 |
5.06 |
7.59 |
---|
Hit Probability(%) |
98 |
98 |
98 |
93 |
60 |
25 |
6 |
2 |
Blast/Fragmentation Effects |
Burst radius Infantry in open 99% kill | 1 mtr |
Burst radius Infantry in open 66% kill | 3 mtr |
Burst radius Infantry in open 33% kill | 9 mtr |
Armour Penetration inc roof at 1 mtr | 0 mm |
An explosion within 1 mtr of infantry in the open will cause 99% casualties - lethal. |
An explosion within 3 mtr of infantry in the open will cause > 66% casualties and could damage some AFV's. |
An explosion within 9 mtr of infantry in the open will cause 33% casualties. |
The blast effect of this shell exploding within 1 mtr of an armoured vehicle will not cause any significant armour damage. |
|
|
Hit probability is based on a static 2 x 2.4 metre panel at 0 degrees(vertical) at the range specified.
The data that has been used to create these records has come from Wikipedia, The Lone Sentry, The Bundes Archive
and numerous books and websites that have provided the detailed information that has not been available anywhere else. The
information we use to calculate the penetration tables, flight times and the hit probability comes from the Gun Calibre,
the Shell Mass(Kg) and the muzzle velocity, plus range reductions to allow for gravity and wind resistance. This calculation
originally came from a pre-war Krupp calculation which has been modified, and seems to fit the actual test results.
© WWIITanks 1980-2024
|
|
|
|
|
| | |