|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Britain Cruiser Mk IIA (A10) Ordnance classification - A10
|
| The Cruiser Mk IIA was designed in 1937, manufactured by Vickers Armstrong based on the existing fully tracked A9 and was in use from 1939 to 1941. |
|
| Specifications | Operational Date(s) | 1939 - 1941 | Ordnance classification | A10 | Quantity Produced | 162 | Weight | 13.75 tonne | Crew | 5 | M.G's small | 2 | M.G's large(>10mm) | n/a | Length | 5.60 mtr | Width | 2.56 mtr | Height | 2.62 mtr | Engine Details/Performance | Max Road Speed | 16 mph | Max Cross Country Speed | 8 mph | Range Road | 100 miles | Range Cross Country | 40 miles | Fuel Type | Petrol | Fuel Capacity | 117 gal | Horse Power | 150 hp | Power/Weight | 10 hp/tonne | | General Information | The Cruiser Mk IIA was designed in 1937, manufactured by Vickers Armstrong based on the existing fully tracked A9 and was in use from 1939 to 1941.
The vehicle was powered by Associated Equipment Company(AEC) 'AEC Type A179' petrol powerplant producing 150 HP which could drive the vehicle on roads at up to 16 mph with a range of about 100 miles before refuelling. Its cross country performance was adequate providing a max speed of about 8 mph and a range of about 40 miles.
It was armed with 2 light machine guns which were BESA Machine Gun 7.92mms. Its main armament consisted of an Ordnance Q.F. 2pdr which could penetrate 59 mm of flat plate at 400 metres
The Cruiser tank MkII(A10) was a redesigned Mk I(A9) which had upgraded armour and the two auxilliary turrets removed this version also had a hull mounted machine gun.
The turret had power traverse with a 2pdr A/T gun. The vehicle had the two auxilliary machine gun from the Mk I removed , and replaced by one hull mounted machine gun. The armour was upgraded hence the speed reduction over the A9. | |
| Turret | Front | | 30mm | @ | 20° | (32mm) | Side | | 26mm | @ | 20° | (28mm) | Rear | | 30mm | @ | 20° | (32mm) | Top | | 7mm | @ | 90° | (7mm) | | Superstructure | Front | | 22mm | @ | 45° | (31mm) | Side | | 22mm | @ | 0° | (22mm) | Rear | | 12mm | @ | 0° | (12mm) | Top | | 7mm | @ | 90° | (7mm) | |
Hull | Front | | 22mm | @ | 30° | (25mm) | Side | | 22mm | @ | 0° | (22mm) | Rear | | 12mm | @ | 0° | (12mm) | Top | | 7mm | @ | 90° | (7mm) | | Armour (x)mm @ (y)° (Effective mm @ 0°) | Effective Armour - Maximum 32 mm - Minimum 7 mm |
| |
Weapon Details |
|
BESA Machine Gun 7.92mm (Machine Gun) x 2 |
|
|
| | History | |
| | Developed by BSA from the Czechoslovak ZB vz.53 heavy machine gun which used the German 7.92×57mm Mauser ammunition. It was mostly used as the main armament of the Light Tank Mk VIC and Armoured cars such as the Humber Mk I to Mk III.
This 7.92mm gun was used in the armoured divisions as their supply lines were separated from the infantry who used .303 bullets. Once the British started capturing German ammunition this could be immediately used in these tank machine guns. |
| | Manufactured | 1939 - 1966 |
| | Calibre | 7.92mm |
| | Length | L/93 |
| | Rate of Fire | 450 rpm |
| | Number of Rounds | 2000 |
|
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
Cartridge SA, 7.92
(AP Standard Small Arms)
|
7.92mm 0.011Kg 785M/Sec | |
Quoted Penetration 11mm @ 1000mtr/0° |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.16 |
0.37 |
1.1 |
|
|
|
|
|
Penetration(mm@30°) |
10 |
8 |
5 |
|
|
|
|
|
Penetration(mm@0°) |
12 |
10 |
6 |
|
|
|
|
|
Hit Probability(%) |
98 |
98 |
98 |
|
|
|
|
|
Cartridge SA, 7.92
(BALL Standard Small Arms)
|
7.92mm 0.012Kg 785M/Sec | |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.15 |
|
|
|
|
|
|
|
Penetration(mm@30°) |
2 |
|
|
|
|
|
|
|
Penetration(mm@0°) |
3 |
|
|
|
|
|
|
|
Hit Probability(%) |
98 |
|
|
|
|
|
|
|
Weapon Details |
|
Ordnance Q.F. 2pdr (Anti Tank Gun) |
|
|
| | History | |
| | Used both as an Anti Tank gun and as a Tank gun the 2pdr was first used in Belgium in 1939. The majority of the British guns were captured by the Germans at Dunkirk. However the 2pdr manufacture was continued but was slowly replaced by the 6pdr from 1942. |
| | Manufactured | 1936 - 1944 |
| | Calibre | 40mm |
| | Length | L/50 |
| | Rate of Fire | 22 rpm |
| | Number of Rounds | 100 |
|
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
AP/T Mk I
(AP Armor Piercing)
|
40mm 1.08Kg 792M/Sec | |
Quoted Penetration 53mm@455m |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.13 |
0.27 |
0.56 |
1.26 |
2.17 |
3.37 |
5.06 |
7.58 |
Penetration(mm@30°) |
64 |
58 |
51 |
41 |
33 |
25 |
19 |
13 |
Penetration(mm@0°) |
74 |
67 |
59 |
48 |
39 |
30 |
22 |
16 |
Hit Probability(%) |
98 |
98 |
98 |
93 |
60 |
25 |
6 |
2 |
HE/T Mk II after 1942
(HE High Explosive)
|
40mm 0.86Kg 792M/Sec | 0.085Kg explosive |
Maximum Range not shown as gun elevation is limited |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.13 |
0.27 |
0.56 |
1.26 |
2.17 |
3.37 |
5.06 |
7.59 |
Direct Fire |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.13 |
0.27 |
0.56 |
1.26 |
2.17 |
3.37 |
5.06 |
7.59 |
---|
Hit Probability(%) |
98 |
98 |
98 |
93 |
60 |
25 |
6 |
2 |
Blast/Fragmentation Effects |
Burst radius Infantry in open 99% kill | 1 mtr |
Burst radius Infantry in open 66% kill | 3 mtr |
Burst radius Infantry in open 33% kill | 9 mtr |
Armour Penetration inc roof at 1 mtr | 0 mm |
An explosion within 1 mtr of infantry in the open will cause 99% casualties - lethal. |
An explosion within 3 mtr of infantry in the open will cause > 66% casualties and could damage some AFV's. |
An explosion within 9 mtr of infantry in the open will cause 33% casualties. |
The blast effect of this shell exploding within 1 mtr of an armoured vehicle will not cause any significant armour damage. |
|
|
Hit probability is based on a static 2 x 2.4 metre panel at 0 degrees(vertical) at the range specified.
The data that has been used to create these records has come from Wikipedia, The Lone Sentry, The Bundes Archive
and numerous books and websites that have provided the detailed information that has not been available anywhere else. The
information we use to calculate the penetration tables, flight times and the hit probability comes from the Gun Calibre,
the Shell Mass(Kg) and the muzzle velocity, plus range reductions to allow for gravity and wind resistance. This calculation
originally came from a pre-war Krupp calculation which has been modified, and seems to fit the actual test results.
© WWIITanks 1980-2024
|
|
|
|
|
| | | |