|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Britain Cruiser Mk VI (Crusader III AA MkII) Ordnance classification - A15
|
| The Cruiser Mk VI was designed in 1942, manufactured by Nuffield based on the existing fully tracked A13 III(Covenanter) and was in use from 1943 to 1945. |
|
| Specifications | Operational Date(s) | 1943 - 1945 | Ordnance classification | A15 | Quantity Produced | 5300 | Weight | 20 tonne | Crew | 5 | M.G's small | n/a | M.G's large(>10mm) | n/a | Length | 6.05 mtr | Width | 2.66 mtr | Height | 2.26 mtr | Engine Details/Performance | Max Road Speed | 28 mph | Max Cross Country Speed | 15 mph | Range Road | 112 miles | Range Cross Country | 44 miles | Fuel Type | Petrol | Fuel Capacity | 120 gal | Horse Power | 340 hp | Power/Weight | 17 hp/tonne | | General Information | The Cruiser Mk VI was designed in 1942, manufactured by Nuffield based on the existing fully tracked A13 III(Covenanter) and was in use from 1943 to 1945.
The vehicle was powered by Nuffield 'Liberty' petrol powerplant producing 340 HP which could drive the vehicle on roads at up to 28 mph with a range of about 112 miles before refuelling. Its cross country performance was good providing a max speed of about 15 mph and a range of about 44 miles.
Its main armament consisted of an Oerlikon 20mm L/70 which could penetrate 10 mm of flat plate at 400 metres
The Crusader tank was a redesigned A13 Mk III as a heavy cruiser tank that could rapidly move and provide good A/T performance.
The turret was a complex angular shape holding the twin Oerlikon 20mm guns in a high angle mount. The auxiliary machine gun turret was removed in this version. | |
| Turret | Front | | 49mm | @ | 7° | (49mm) | Side | | 24mm | @ | 45° | (34mm) | Rear | | 30mm | @ | 32° | (35mm) | Top | | 12mm | @ | 90° | (12mm) | | Superstructure | Front | | 30mm | @ | 38° | (38mm) | Side | | 14mm | @ | 0° | (14mm) | Rear | | 28mm | @ | 11° | (29mm) | Top | | 7mm | @ | 90° | (7mm) | |
Hull | Front | | 20mm | @ | 60° | (40mm) | Side | | 14mm | @ | 0° | (14mm) | Rear | | 28mm | @ | 11° | (29mm) | Top | | 7mm | @ | 90° | (7mm) | | Armour (x)mm @ (y)° (Effective mm @ 0°) | Effective Armour - Maximum 49 mm - Minimum 7 mm |
| |
Weapon Details |
|
Oerlikon 20mm L/70 (Anti Aircraft) x 2 |
|
|
| | History | |
| | Manufactured in Switzerland the first British imports arrived in 1940, and subsequently manufactured under licence in Ruislip London later in 1940. Two versions were manufactured with different barrel lengths L/70 and L/85 which gave muzzle velocities of 820m/sec L70 and 1050m/sec L/85. The L/70 could deliver shells at 450rpm and the L/85 at 900-1000 rpm. |
| | Manufactured | 1940 - Present |
| | Calibre | 20mm |
| | Length | L/70 |
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
20x101RB
(HE High Explosive)
|
20mm 0.13Kg 750M/Sec | ≈0.02Kg explosive |
Maximum Range 914 Mtr |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.14 |
0.3 |
0.67 |
1.79 |
4 |
|
|
|
Direct Fire |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.14 |
0.3 |
0.67 |
1.79 |
4 |
10.95 |
|
|
---|
Hit Probability(%) |
98 |
98 |
98 |
77 |
22 |
0 |
|
|
Blast/Fragmentation Effects |
Burst radius Infantry in open 99% kill | 1 mtr |
Burst radius Infantry in open 66% kill | 2 mtr |
Burst radius Infantry in open 33% kill | 7 mtr |
Armour Penetration inc roof at 1 mtr | 0 mm |
An explosion within 1 mtr of infantry in the open will cause 99% casualties - lethal. |
An explosion within 2 mtr of infantry in the open will cause > 66% casualties and could damage some AFV's. |
An explosion within 7 mtr of infantry in the open will cause 33% casualties. |
The blast effect of this shell exploding within 1 mtr of an armoured vehicle will not cause any significant armour damage. |
|
|
Hit probability is based on a static 2 x 2.4 metre panel at 0 degrees(vertical) at the range specified.
The data that has been used to create these records has come from Wikipedia, The Lone Sentry, The Bundes Archive
and numerous books and websites that have provided the detailed information that has not been available anywhere else. The
information we use to calculate the penetration tables, flight times and the hit probability comes from the Gun Calibre,
the Shell Mass(Kg) and the muzzle velocity, plus range reductions to allow for gravity and wind resistance. This calculation
originally came from a pre-war Krupp calculation which has been modified, and seems to fit the actual test results.
© WWIITanks 1980-2024
|
|
|
|
|
|