|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
France Renault FT 17 Ordnance classification - Light Tank
|
| The Renault FT 17 was designed in 1916, manufactured by Renault based on the existing fully tracked Light Tank and was in use from 1917 to 1935. |
|
| Specifications | Operational Date(s) | 1917 - 1935 | Ordnance classification | Light Tank | Quantity Produced | 1177 | Weight | 6.5 tonne | Crew | 2 | M.G's small | 1 | M.G's large(>10mm) | n/a | Length | 4.08 mtr | Width | 1.74 mtr | Height | 2.15 mtr | Engine Details/Performance | Max Road Speed | 5 mph | Max Cross Country Speed | 3 mph | Range Road | 35 miles | Range Cross Country | 14 miles | Fuel Type | Petrol | Fuel Capacity | unknown | Horse Power | 35 hp | Power/Weight | 5 hp/tonne | | General Information | The Renault FT 17 was designed in 1916, manufactured by Renault based on the existing fully tracked Light Tank and was in use from 1917 to 1935.
The vehicle was powered by Renault '4 Cylinder 35hp' petrol powerplant producing 35 HP which could drive the vehicle on roads at up to 5 mph with a range of about 35 miles before refuelling. Its cross country performance was poor providing a max speed of about 3 mph and a range of about 14 miles.
It was armed with 1 light machine gun , a Mle 1914. A small number of early models were produced with a moulded steel turret, but this was difficult to make so the later models were provided with an eight sided rivetted turret. | |
| Turret | Front | | 16mm | @ | 13° | (16mm) | Side | | 16mm | @ | 15° | (17mm) | Rear | | 16mm | @ | 15° | (17mm) | Top | | 8mm | @ | 65° | (9mm) | | Superstructure | Front | | 16mm | @ | 70° | (47mm) | Side | | 16mm | @ | 0° | (16mm) | Rear | | 16mm | @ | 0° | (16mm) | Top | | 6mm | @ | 67° | (7mm) | |
Hull | Front | | 16mm | @ | 29° | (18mm) | Side | | 16mm | @ | 0° | (16mm) | Rear | | 16mm | @ | 0° | (16mm) | Top | | 6mm | @ | 67° | (7mm) | | Armour (x)mm @ (y)° (Effective mm @ 0°) | Effective Armour - Maximum 47 mm - Minimum 7 mm |
| |
Weapon Details |
|
Mle 1914 (Machine Gun) |
|
|
| | History | |
| | Originally designed for the Infantry in World War 1 the Hotchkiss was installed in early tanks from 1915. |
| | Manufacturer | Hotchkiss |
| | Manufactured | 1900 - 1924 |
| | Calibre | 8mm |
| | Length | L/96 |
| | Rate of Fire | 500 rpm |
| | Number of Rounds | 2000 |
|
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
8×50mmR Lebel
(BALL Standard Small Arms)
|
8mm 0.012Kg 730M/Sec | |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.17 |
|
|
|
|
|
|
|
Penetration(mm@30°) |
2 |
|
|
|
|
|
|
|
Penetration(mm@0°) |
3 |
|
|
|
|
|
|
|
Hit Probability(%) |
98 |
|
|
|
|
|
|
|
|
|
|
Hit probability is based on a static 2 x 2.4 metre panel at 0 degrees(vertical) at the range specified.
The data that has been used to create these records has come from Wikipedia, The Lone Sentry, The Bundes Archive
and numerous books and websites that have provided the detailed information that has not been available anywhere else. The
information we use to calculate the penetration tables, flight times and the hit probability comes from the Gun Calibre,
the Shell Mass(Kg) and the muzzle velocity, plus range reductions to allow for gravity and wind resistance. This calculation
originally came from a pre-war Krupp calculation which has been modified, and seems to fit the actual test results.
© WWIITanks 1980-2024
|
|
|
|
|