|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
France AMD 175 (Panhard) |
| The AMD 175 was designed in 1932, manufactured by Panhard based on the existing 4 x 2 drive Armoured Car and was in use from 1935 to 1945. |
|
| Specifications | Operational Date(s) | 1935 - 1945 | Quantity Produced | 30 | Weight | 6.5 tonne | Crew | 4 | M.G's small | 1 | M.G's large(>10mm) | n/a | Length | 4.62 mtr | Width | 2.26 mtr | Height | 2.36 mtr | Engine Details/Performance | Max Road Speed | 47 mph | Max Cross Country Speed | 20 mph | Range Road | 405 miles | Range Cross Country | 240 miles | Fuel Type | Petrol | Fuel Capacity | 38 gal | Horse Power | 86 hp | Power/Weight | 13 hp/tonne | | General Information | The AMD 175 was designed in 1932, manufactured by Panhard based on the existing 4 x 2 drive Armoured Car and was in use from 1935 to 1945.
The vehicle was powered by Panhard '4-cylinder' petrol powerplant producing 86 HP which could drive the vehicle on roads at up to 47 mph with a range of about 405 miles before refuelling. Its cross country performance was good providing a max speed of about 20 mph and a range of about 240 miles.
It was armed with 1 light machine gun , a Mitrailleuse modèle 1931. Its main armament consisted of an C.L. de 25 antichar SA-L mle1934 L/72 which could penetrate 41 mm of flat plate at 100 metres
The vehicle had bullet proof tyres and very large rear wheels when compared with the front wheels.
This was an updated AMD 165 usually armed with a 25mm anti tank gun. | |
| Turret | Front | | 26mm | @ | 24° | (28mm) | Side | | 15mm | @ | 26° | (17mm) | Rear | | 15mm | @ | 30° | (17mm) | Top | | 7mm | @ | 82° | (7mm) | | Superstructure | Front | | 20mm | @ | 21° | (21mm) | Side | | 15mm | @ | 0° | (15mm) | Rear | | 15mm | @ | 3° | (15mm) | Top | | 7mm | @ | 87° | (7mm) | |
Hull | Front | | 20mm | @ | 0° | (20mm) | Side | | 15mm | @ | 0° | (15mm) | Rear | | 15mm | @ | 41° | (20mm) | Top | | 7mm | @ | 90° | (7mm) | | Armour (x)mm @ (y)° (Effective mm @ 0°) | Effective Armour - Maximum 28 mm - Minimum 7 mm |
| |
Weapon Details |
|
Mitrailleuse modèle 1931 (Machine Gun) |
|
|
| | History | |
| | Designed by Lt Colonel Reibel, the FM 24/29 was developed into a heavier machine gun capable of relatively sustained fire, by giving it an extremely thick and massive barrel, to act as a heat sink. |
| | Manufacturer | Reibel |
| | Manufactured | 1932 - 1945 |
| | Calibre | 7.50mm |
| | Length | L/80 |
| | Rate of Fire | 450 rpm |
| | Number of Rounds | 2400 |
|
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
7.5 MAS
(AP Standard Small Arms)
|
7.50mm 0.009Kg 820M/Sec | |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.15 |
0.36 |
1.2 |
|
|
|
|
|
Penetration(mm@30°) |
10 |
7 |
4 |
|
|
|
|
|
Penetration(mm@0°) |
12 |
9 |
5 |
|
|
|
|
|
Hit Probability(%) |
98 |
98 |
96 |
|
|
|
|
|
7.5 MAS
(BALL Standard Small Arms)
|
7.50mm 0.009Kg 820M/Sec | |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.15 |
|
|
|
|
|
|
|
Penetration(mm@30°) |
1 |
|
|
|
|
|
|
|
Penetration(mm@0°) |
2 |
|
|
|
|
|
|
|
Hit Probability(%) |
98 |
|
|
|
|
|
|
|
Weapon Details |
|
C.L. de 25 antichar SA-L mle1934 L/72 |
|
| | Manufactured | 1934 - unknown |
| | Calibre | 25mm |
| | Length | L/72 |
|
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
Hotchkiss 25mm
(AP Armor Piercing)
|
25mm 0.32Kg 950M/Sec | |
Quoted Penetration 47mm @ 100mtr/0° |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.11 |
0.23 |
0.52 |
1.33 |
2.78 |
6.24 |
|
|
Penetration(mm@30°) |
40 |
33 |
25 |
16 |
9 |
4 |
|
|
Penetration(mm@0°) |
47 |
39 |
30 |
19 |
11 |
5 |
|
|
Hit Probability(%) |
98 |
98 |
98 |
90 |
39 |
3 |
|
|
|
|
|
Hit probability is based on a static 2 x 2.4 metre panel at 0 degrees(vertical) at the range specified.
The data that has been used to create these records has come from Wikipedia, The Lone Sentry, The Bundes Archive
and numerous books and websites that have provided the detailed information that has not been available anywhere else. The
information we use to calculate the penetration tables, flight times and the hit probability comes from the Gun Calibre,
the Shell Mass(Kg) and the muzzle velocity, plus range reductions to allow for gravity and wind resistance. This calculation
originally came from a pre-war Krupp calculation which has been modified, and seems to fit the actual test results.
© WWIITanks 1980-2024
|
|
|
|
|
| |