|
|
|
|
|
|
 |
 |
|
|
|
|
|
|
|
|
|
|
|
Germany
7.5cm Pak 40/3 L/46 Gw 38(t)f Ausf H (Marder III)
Ordnance classification - SdKfz 138
|
| The 7.5cm Pak 40/3 L/46 Gw 38(t)f Ausf H was designed in 1941, manufactured by BMM based on the existing fully tracked Czech LT Vz 38 and was in use from 1942 to 1945. |
|
|
| | Specifications | | Operational Date(s) | 1942 - 1945 | | Ordnance classification | SdKfz 138 | | Quantity Produced | 417 | | Weight | 10.8 tonne | | Crew | 4 | | M.G's small | 1 | | M.G's large(>10mm) | n/a | | Length | 4.61 mtr | | Width | 2.15 mtr | | Height | 2.51 mtr | | Engine Details/Performance | | Max Road Speed | 25 mph | | Max Cross Country Speed | 13 mph | | Range Road | 150 miles | | Range Cross Country | 60 miles | | Fuel Type | Petrol | | Fuel Capacity | unknown | | Horse Power | 125 hp | | Power/Weight | 11 hp/tonne | | | General Information | The 7.5cm Pak 40/3 L/46 Gw 38(t)f Ausf H was designed in 1941, manufactured by BMM based on the existing fully tracked Czech LT Vz 38 and was in use from 1942 to 1945.
The vehicle was powered by Praga 'EPA/2' petrol powerplant producing 125 HP which could drive the vehicle on roads at up to 25 mph with a range of about 150 miles before refuelling. Its cross country performance was good providing a max speed of about 13 mph and a range of about 60 miles.
It was armed with 1 light machine gun. Based on a Czech PzKpfw 38(t) chassis, this was a sucessful attempt to mount the effective PaK 40 75mm Ant-Tank gun on a mobile platform. | |
| | Turret | | Front | | 15mm | @ | 25° | (17mm) | | Side | | 15mm | @ | 25° | (17mm) | | Rear | n/a | | Top | n/a |
| | Superstructure | | Front | | 50mm | @ | 15° | (52mm) | | Side | | 15mm | @ | 0° | (15mm) | | Rear | n/a | | Top | | 10mm | @ | 75° | (10mm) |
|
| Hull | | Front | | 50mm | @ | 15° | (52mm) | | Side | | 15mm | @ | 0° | (15mm) | | Rear | | 15mm | @ | 16° | (16mm) | | Top | | 8mm | @ | 90° | (8mm) |
| | Armour (x)mm @ (y)° (Effective mm @ 0°) | | Effective Armour - Maximum 52 mm - Minimum 8 mm |
| |
|
|
Hit probability is based on a static 2 x 2.4 metre panel at 0 degrees(vertical) at the range specified.
The data that has been used to create these records has come from Wikipedia, The Lone Sentry, The Bundes Archive
and numerous books and websites that have provided the detailed information that has not been available anywhere else. The
information we use to calculate the penetration tables, flight times and the hit probability comes from the Gun Calibre,
the Shell Mass(Kg) and the muzzle velocity, plus range reductions to allow for gravity and wind resistance. This calculation
originally came from a pre-war Krupp calculation which has been modified, and seems to fit the actual test results.
© WWIITanks 1980-2024
|
|
|
|
|
|
