| The Beaverette MKII was designed in 1940, manufactured by Standard Cars based on the existing 4 x 2 drive commercial car and was in use from 1941 to 1945. |
|
| Specifications | Operational Date(s) | 1941 - 1945 | Quantity Produced | 0 | Weight | 2 tonne | Crew | 2 | M.G's small | 1 | M.G's large(>10mm) | n/a | Length | 4.11 mtr | Width | 1.76 mtr | Height | 1.74 mtr | Engine Details/Performance | Max Road Speed | 30 mph | Max Cross Country Speed | 6 mph | Range Road | 180 miles | Range Cross Country | 36 miles | Fuel Type | Petrol | Fuel Capacity | unknown | Horse Power | 45 hp | Power/Weight | 22 hp/tonne | | General Information | The Beaverette MKII was designed in 1940, manufactured by Standard Cars based on the existing 4 x 2 drive commercial car and was in use from 1941 to 1945.
The vehicle was powered by Standard 'Standard 4-cylinder' petrol powerplant producing 45 HP which could drive the vehicle on roads at up to 30 mph with a range of about 180 miles before refuelling. Its cross country performance was adequate providing a max speed of about 6 mph and a range of about 36 miles.
It was armed with 1 light machine gun , a Bren Gun. This vehicle was based on a Standard commercial car chassis to which armour of 11mm of steel backed by 3 inches of wooden planks was attached. The mark II had all round armour and an open top and was armed with a Bren gun.
Lord Beaverbrook who was the Minister of Aircraft Production ordered these vehicles which then became known as Beaverette | |
| Turret | Front | n/a | Side | n/a | Rear | n/a | Top | n/a | | Superstructure | Front | | 9mm | @ | 0° | (9mm) | Side | | 9mm | @ | 0° | (9mm) | Rear | | 9mm | @ | 0° | (9mm) | Top | n/a | |
Hull | Front | | 9mm | @ | 0° | (9mm) | Side | | 9mm | @ | 0° | (9mm) | Rear | | 9mm | @ | 0° | (9mm) | Top | n/a | | Armour (x)mm @ (y)° (Effective mm @ 0°) | Effective Armour - Maximum 9 mm - Minimum n/a mm |
| |
Weapon Details |
|
Bren Gun (Machine Gun) |
|
|
| | History | |
| | The Bren gun was licenced from the Czechoslovak ZB vz.27 light machine gun which was designed and manufactured in Brno from 1935.
It fired the standard British .303 rifle round. |
| | Manufactured | 1930 - 2004 |
| | Calibre | 7.70mm |
| | Length | L/82 |
| | Rate of Fire | 500 rpm |
|
Ammunition Details |
Name/Id |
Calibre Weight MVelocity |
Explosive Content |
Standard british .303 round - HPBT
(BALL Standard Small Arms)
|
7.70mm 0.01Kg 761M/Sec | |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.17 |
|
|
|
|
|
|
|
Penetration(mm@30°) |
1 |
|
|
|
|
|
|
|
Penetration(mm@0°) |
2 |
|
|
|
|
|
|
|
Hit Probability(%) |
98 |
|
|
|
|
|
|
|
Standard british .303 round
(BALL Standard Small Arms)
|
7.70mm 0.017Kg 783M/Sec | |
Range(Mtr) | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 |
Flight Time(Secs) |
0.15 |
|
|
|
|
|
|
|
Penetration(mm@30°) |
4 |
|
|
|
|
|
|
|
Penetration(mm@0°) |
5 |
|
|
|
|
|
|
|
Hit Probability(%) |
98 |
|
|
|
|
|
|
|
|
|
|
Hit probability is based on a static 2 x 2.4 metre panel at 0 degrees(vertical) at the range specified.
The data that has been used to create these records has come from Wikipedia, The Lone Sentry, The Bundes Archive
and numerous books and websites that have provided the detailed information that has not been available anywhere else. The
information we use to calculate the penetration tables, flight times and the hit probability comes from the Gun Calibre,
the Shell Mass(Kg) and the muzzle velocity, plus range reductions to allow for gravity and wind resistance. This calculation
originally came from a pre-war Krupp calculation which has been modified, and seems to fit the actual test results.
© WWIITanks 1980-2024
If you have any information, or comments on our site,
please E-Mail Simon at
wwiitanks@villagenet.co.uk
Page Last Updated: 2019-11-21 13:29:44
|
|